Gigaset C530A IP is a phone that combines VoIP and landline telephony, supporting multiple simultaneous calls, energy-saving functionality, and an answering machine with audio recording.
For more information about the device, please read the manufacturer's manual.
Before starting the setup, please create a SIP account in your Ringostat dashboard. You can find instructions on creating a SIP account here.
Setting Up the SIP Phone
Before configuring the phone, please make sure it is powered on and that an Ethernet cable is connected to the device. The cable must be plugged into the LAN port of the Gigaset C530A IP base unit.
Finding the Phone's IP Address
To access the web interface, you first need to find the IP address of the DECT base station. There are several ways to do this:
Press and release the registration button on the base station — the handset will ring and the base station's IP address will appear on its screen.
Open a browser and enter the following in the address bar: gigaset-config.com
On the handset, go to Menu → Settings → System → Local Network → IP Address
SIP phone settings web Interface
1. To open the settings interface enter the phone's IP address in your browser's address bar.
The settings page will open and prompt you to enter a password.
The default PIN is 0000. You can change it later in the DECT base station settings.
2. You can also change the display language for the web interface. Select the preferred language from the dropdown list, then confirm both the password and language by clicking "OK".
3. Go to the Telephony → Connections tab. In the Active column, check the box next to the account you want to configure, then click "Edit".
4. Entering your credentials
Fill in the fields with your SIP account details:
Connection name or number — SIP account login or the agent's extension number
Authentication name — SIP account login
Authentication password — SIP account password
Username — SIP account login
Display name — SIP account login
Domain — sip.ringostat.com
Proxy server address — sip.ringostat.com
Proxy server port — 5060
Registration server address — sip.ringostat.com
Registration port — 5060
If you have multiple phones — each one must use a different port: 5060, 5061, 5062, and so on (increment by 1 for each additional device).
Please also check the "Enable STUN" checkbox and fill in the following:
STUN server address — stun.ringostat.com
STUN server port — 3479
5. Codec settings
In the left-hand menu, go to the Audio subsection, select "Own codec preference", and click "Show advanced settings".
We recommend using the following codecs: G.711a (alaw), G.711u (ulaw), OPUS, GSM.
6. Number assignment and internal line setup
In the left-hand menu, go to the Number Assignment subsection. In the Name field at the top, enter the agent's extension number, then check both the "For outgoing calls" and "For incoming calls" boxes next to the account you configured earlier.
Please verify the registration under Settings → Telephony → Connections — you may occasionally need to re-enter the password.
The status should be "Registered".
